电工钢连退涂层机组带钢悬垂曲线模型的计算与分析

电工钢 ›› 2019, Vol. 1 ›› Issue (2): 58-60.

• • 上一篇

电工钢连退涂层机组带钢悬垂曲线模型的计算与分析

张伟1,2，何云飞1,2，李文1,2，王峰1,2,张峰1

1.北京首钢国际工程技术有限公司，北京 100043；2.北京市冶金三维仿真设计工程技术研究中心，北京 100043

出版日期:2019-12-28 发布日期:2020-08-24

Calculation and analysis of strip suspension curve model in the continuous annealing and coating line

ZHANG Wei1,2,HE Yunfei1,2,LI Wen1,2,WANG Feng1,2,ZHANG Feng1

1.BeiJing ShouGang International Engineering Technology CO.,LTD.,BeiJing 100043,China；2. Metallurgical Engineering 3D Simulation Design Engineering Technology Research Center of Beijing,BeiJing 100043,China

Online:2019-12-28 Published:2020-08-24

摘要/Abstract

摘要： 在无取向电工钢连退涂层机组中，带钢退火后会进行绝缘涂层的涂覆，为了保证涂层质量，避免带钢表面尚未干燥的涂液被破坏，涂层后的带钢采用悬垂的过钢方式进入漂浮炉，本文以电工钢连退涂层机组涂机与漂浮炉中间的悬垂带钢为研究对象，详细阐述了带钢悬垂曲线模型的建立过程，并且对4种不同工况下带钢的悬垂曲线进行了计算与分析，为机组的合理布置提供了理论依据。

关键词: 电工钢, 连退涂层机组, 涂机, 漂浮炉, 悬垂曲线, 模型

Abstract: In the continuous annealing and coating line for nongrain oriented silicon steel, the insulation coating should be coated on the strip surface after annealing. To ensure the quality of coating and avoid the undried coating liquid on the strip surface been destroyed, the coated strip was suspended to through into the floating furnace. This paper researched the strip between the coater and the floating furnace, and described the process of establishing the strip suspension curve in detail, calculating and analyzing four suspension curves under different working conditions, which can provide theoretical basis for reasonable arrangement of the unit.

Key words: electrical steel, continue annealing and coating line, coater, floating furnace, suspension curve, model

张伟, 何云飞, 李文, 王峰, 张峰. 电工钢连退涂层机组带钢悬垂曲线模型的计算与分析[J]. 电工钢, 2019, 1(2): 58-60.

ZHANG Wei, HE Yunfei, LI Wen, WANG Feng, ZHANG Feng. Calculation and analysis of strip suspension curve model in the continuous annealing and coating line[J]. Electrical Steel, 2019, 1(2): 58-60.

[1]	陈　卓. 中国电工钢发展变化及新时代需求研究[J]. 电工钢, 2019, 1(2): 1-6.
[2]	张凤泉, 胡文才. 电工钢冷轧装备现状及冷轧技术研究[J]. 电工钢, 2019, 1(2): 7-13.
[3]	杜丽影, 刘冬, 邝蓝翔, 尚伦, 凃应宏. 无取向电工钢疲劳裂纹萌生机理及扩展规律研究[J]. 电工钢, 2019, 1(2): 37-41.
[4]	刘青松, 张振海, 裴英豪, 施立发, 祁旋. Fe-3.0 %Si无取向电工钢高温延塑性研究[J]. 电工钢, 2019, 1(2): 42-44.
[5]	朱玉珍. 无取向电工钢涂层发展及环保型涂层技术进展[J]. 电工钢, 2019, 1(2): 45-48.
[6]	张寿荣, 陈卓, 胡守天. 从能源发展谈我国电工钢产业战略思路[J]. 电工钢, 2019, 1(1): 1-4.
[7]	李秀章, 周新华. 取向电工钢片铁损分布不均匀性测量分析[J]. 电工钢, 2019, 1(1): 16-18.
[8]	任强, 程林, 胡志远, 张立峰. 不同成分体系无取向电工钢中夹杂物和析出物对比[J]. 电工钢, 2019, 1(1): 37-41.

电工钢连退涂层机组带钢悬垂曲线模型的计算与分析

Calculation and analysis of strip suspension curve model in the continuous annealing and coating line

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 8

编辑推荐

Metrics

本文评价