单机架轧机L2系统及控制模型的研究与自主开发

电工钢 ›› 2025, Vol. 7 ›› Issue (4): 51-.

单机架轧机L2系统及控制模型的研究与自主开发

程曦1，王欣2，郑娟1,王冲1

1.武汉钢铁有限公司设备管理部,湖北武汉 430083；
2.宝山钢铁股份有限公司设备部，上海 201999

出版日期:2025-08-28 发布日期:2025-09-01

Research and independent development of L2 system and control model for single-stand rolling mill

CHENG Xi1, WANG Xin2, ZHENG Juan1, WANG Chong1

1.Equipment Management Department, Wuhan Iron and Steel Co., Ltd., Wuhan 430083, China;
2.Equipment Department, Baoshan Iron & Steel Co., Ltd., Shanghai 201999, China

Online:2025-08-28 Published:2025-09-01

摘要/Abstract

摘要： 硅钢是国家能源战略的重要产品之一，随着硅钢产品的需求量增加以及各大硅钢生产企业的业务拓展，硅钢产品的规格也越来越多，如何提高硅钢生产模型，特别是轧制模型方面的适应性，有效提高轧制稳定性、减少断带，从而提高产量和质量。在新建的某森吉米尔轧单机架轧机项目中，通过自主集成方式完成L2系统及模型自主开发。

关键词: 自主集成, 轧制模型, 单机架轧机

Abstract: Silicon steel is one of the important products in the national energy strategy. With the increase in the demand for silicon steel products and the business expansion of major silicon steel manufacturers, there are an increasing number of specifications for silicon steel products. How to improve the adaptability of the silicon steel production model, especially the rolling model, effectively enhance rolling stability, reduce strip breakage, and thus improve production volume and quality has always been a hot topic among enterprises. In a newly built single-stand rolling mill project, the independent development of the L2 system and model was completed through independent integration.

Key words: independent integration, rolling model, single stand rolling mill

程曦, 王欣, 郑娟, 王冲. 单机架轧机L2系统及控制模型的研究与自主开发[J]. 电工钢, 2025, 7(4): 51-.

CHENG Xi, WANG Xin, ZHENG Juan, WANG Chong. Research and independent development of L2 system and control model for single-stand rolling mill[J]. Electrical Steel, 2025, 7(4): 51-.