电工钢 ›› 2020, Vol. 2 ›› Issue (4): 43-.

• • 上一篇    下一篇

不同轧向角度取向电工钢磁致伸缩现象研究

向 前1,2, 古兵平1, 张俊鹏1, 陈晓红1   

  1. 1. 武汉钢铁有限公司 质量检验中心, 湖北 武汉 430081;2.武汉科技大学, 湖北 武汉 430080
  • 出版日期:2020-10-28 发布日期:2020-11-02

Study on magnetostriction of oriented electrical steel with different angle to the rolling direction#br#

XIANG Qian1,2, GU Bingping1 , ZHANG Junpeng1, CHEN Xiaohong1   

  1. 1.Quality Inspection Center of Wuhan Iron and Steel Co., Ltd., Wuhan 430081,China;
    2. Wuhan University of Science and Technology, Wuhan 430080,China
  • Online:2020-10-28 Published:2020-11-02

摘要: 对不同轧向角度取向电工钢的磁致伸缩现象进行了研究,发现随着外磁场方向与轧制方向角度的增加,磁致伸缩应变λ0-p先负向缓慢增大,在30°左右达到峰值后再迅速正向快速增大,在90°达到正向峰值。这主要与磁畴初始磁化方向和外磁场方向角度有关。同时,应变振幅λp-p总体上呈上升趋势,表现为先缓慢增加,但由于存在试样长度方向上由缩短转变为伸长的过程,导致应变振幅在30°~60°间略有下降,A计权速度水平LvA和A计权加速度水平LaA与应变振幅的变化规律一致。

关键词: 磁致伸缩, 取向电工钢, 轧向角度

Abstract: The magnetostrictive phenomenon of oriented electrical steel with different angles to the rolling direction was studied systematically, and it was found that the magnetostrictive strain λ0-p first increased slowly in the negative direction with the increase of the angle between external magnetic field direction and the rolling direction, then increased rapidly in the positive direction after reaching the peak value with the angle about 30°, and reached the positive peak value when the angle reached to 90°. This was mainly related to the angle between the direction of initial domain magnetization and the external magnetic field direction. At the same time, the strain amplitude λp-p was rising generally, which was at first increased slowly and decreased slightly when the strain amplitude between 30° and 60° because of the existing process of the sample from shortening to elongation in length direction. The variation law of A weight velocity LvA and A weight acceleration LaA was consistent with the strain amplitude.

Key words: magnetostriction, oriented electrical steel, angle to the rolling direction