连续退火机组入口张力辊设计计算

电工钢 ›› 2020, Vol. 2 ›› Issue (3): 39-42.

连续退火机组入口张力辊设计计算

王明1,赵新宝2，龚磊1，郑利元2，游学昌1，齐杰斌2

1.首钢迁安新能源汽车电工钢有限公司，河北迁安 064400；2.首钢智新迁安电磁材料有限公司，河北迁安 064400

出版日期:2020-08-28 发布日期:2020-09-08

Design and calculation of entrance tension roller of continuous annealing unit

WANG Ming1, ZHAO Xinbao2, GONG Lei1, ZHENG Liyuan2, YOU Xuechang1, QI Jiebin2

1.Shougang Qian’an New Energy vehicle electrical steel Co. Ltd., Qian’an 064400,China; 2.Shougang Zhixin Qian’an Electronmagetic Materials Co., Ltd., Qian’an 064400, China

Online:2020-08-28 Published:2020-09-08

摘要/Abstract

摘要： 结合机组生产带钢性能参数，设计核算迁钢冷轧连续退火机组入口段1号张力辊辊径及材质、带钢包角、张力放大系数以及减速机、传动电机等相关技术参数，验算电机功率满足现场实际需求，为同类机组的设计提供参考。

关键词: 张力辊, 设计计算, 张力, 功率

Abstract: Combined with the performance parameters of the cold rolling continuous annealing unit in the production of strip steels in Qiansteel, both the diameter, the material, the strip cladding angle and the tension amplification coefficient of No.1 tension roller in the entrance section of the unit, and the relevant parameters of reducer, drive motor were designed and accounted in this paper. The results showed that the checked power of the motor met the actual needs of production, which can provide reference to the design of similar units.

Key words: tension roller, design and calculation, tension, power

王明, 赵新宝, 龚磊, 郑利元, 游学昌, 齐杰斌. 连续退火机组入口张力辊设计计算[J]. 电工钢, 2020, 2(3): 39-42.

WANG Ming, ZHAO Xinbao, GONG Lei, ZHENG Liyuan, YOU Xuechang, QI Jiebin. Design and calculation of entrance tension roller of continuous annealing unit[J]. Electrical Steel, 2020, 2(3): 39-42.