电工钢 ›› 2025, Vol. 7 ›› Issue (6): 54-.

• • 上一篇    下一篇

压缩机用硅钢片相容性试验分析

张圣东   

  1. (安阳钢铁股份有限公司 技术中心,河南 安阳 455000)
  • 出版日期:2025-12-28 发布日期:2025-12-30

Analysis of compatibility tests of silicon steel sheets for compressors

ZHANG Shengdong   

  1. (Technology Center of Anyang Iron and Steel Co., Ltd., Anyang 455000,China)
  • Online:2025-12-28 Published:2025-12-30

摘要: 通过硅钢片与两种冷冻油制冷剂的相容性试验,对硅钢片单一零部件分别开展高温、低温相容性试验,并根据试验结果判定该零部件是否符合相容性要求。通过试验结果对比两种不同介质与硅钢片的相容性差异,为硅钢片在不同介质中的兼容性做判定依据。

关键词: 硅钢片, 冷冻油, 制冷剂, 相容性试验

Abstract: Compatibility tests were conducted on silicon steel sheets with two types of refrigerant oilrefrigerant media to evaluate the compatibility of the sheets, including separate hightemperature and lowtemperature compatibility tests on individual silicon steel sheet components. Based on the test results, it was determined whether the components meet the compatibility requirements. The compatibility differences between the two media and silicon steel sheets were compared based on the test results, providing a basis for determining the applicability of silicon steel sheets in different media.

Key words: silicon steel sheets, refrigerant oil, refrigerant, compatibility test