新能源车电机用硅钢选材分析

电工钢 ›› 2022, Vol. 4 ›› Issue (1): 25-.

新能源车电机用硅钢选材分析

王家宝1，马德稷1，李丹1，张航2，裴瑞琳1

1.沈阳工业大学，辽宁沈阳 110870;2.苏州英磁新能源科技有限公司，江苏苏州 215000

出版日期:2022-02-28 发布日期:2022-02-21

Analysis of material selection on silicon steel for new energy vehicle motor

WANG Jiabao1,MA Deji1,LI Dan1,ZHANG Hang2,PEI Ruilin1

1.Shenyang University of Technology，Shenyang 110870，China；2.Suzhou Inn-Mag New Energy Ltd., Suzhou 215000, China

Online:2022-02-28 Published:2022-02-21

摘要/Abstract

摘要： 为了提升新能源车用驱动电机的功率密度，各大电机厂商都在不断地提升电机转速，随之而来的问题就是电机的铁耗也在不断增高，如何降低电机铁耗成为了电机厂商必须要解决的难题。本文讨论了电机铁耗的组成部分及影响因素，并对1台8极48槽的永磁同步电机分别使用3种不同厚度的材料进行仿真，对比其效率及铁耗分布，推导出驱动电机中硅钢厚度、铁耗及成本的关系，最后对驱动电机选材提出建议。

关键词: 新能源用电机, 铁耗, 选材建议

Abstract: In order to increase the power density of traction motor for new energy vehicles, major motor manufacturers have been constantly increasing the motor speed. The following problem that manufacturers have to solve is how to reduce the increasing iron loss when the motor speed is increased. The components and influencing factors of motors’ iron loss were discussed in this paper, and an 8pole 48slot permanent magnet synchronous motor using three different thickness materials was simulated. To compare its efficiency and iron loss distribution, the relationship of the thickness of silicon steel in drive motors, the iron loss and the cost were derived. And finally some recommendations for the selection of drive motor materials were put forward.

Key words: new energy vehicle motor, iron loss, material selection suggestion

王家宝, 马德稷, 李丹, 张航, 裴瑞琳. 新能源车电机用硅钢选材分析[J]. 电工钢, 2022, 4(1): 25-.

WANG Jiabao, MA Deji, LI Dan, ZHANG Hang, PEI Ruilin. Analysis of material selection on silicon steel for new energy vehicle motor[J]. Electrical Steel, 2022, 4(1): 25-.