高效冰箱压缩机用高牌号无取向硅钢研制

电工钢 ›› 2021, Vol. 3 ›› Issue (3): 21-.

高效冰箱压缩机用高牌号无取向硅钢研制

张振海，鲍磊，孙涛，张文英，赵海山，吴耀光

马鞍山钢铁股份有限公司第一钢轧总厂，安徽马鞍山 243000

出版日期:2021-06-28 发布日期:2021-07-06

Research on high grade non-oriented electrical steel applied to high efficient refrigerator compressor

ZHANG Zhenhai, BAO Lei, SUN Tao, ZHANG Wenying, ZHAO Haishan, WU Yaoguang

No.1 Steel Making and Rolling General Plant of Ma'anshan Iron and Steel Co.，Ltd.，Ma'anshan 243000，China

Online:2021-06-28 Published:2021-07-06

摘要/Abstract

摘要：

为满足高效冰箱压缩机电机性能要求，通过成分设计、RH精炼、连铸、热轧、一次冷轧、连续退火和精整包装等工序，成功试制出高牌号无取向硅钢产品，磁性能测试铁损P1.5/50为2.73 W/kg，磁感B50为1.70 T。所研制的产品用于高效冰箱压缩机行业，电机定子退火后平均铁损P1.5/50为1.80 W/kg，整机装配后电机效率≥86 %，能够满足高效冰箱压缩机电机的性能要求。

关键词: 高效冰箱压缩机, 高牌号无取向硅钢, 磁性能, 电机效率

Abstract:

In order to satisfy the performance requirements of high efficient refrigerator compressor motors， a high grade non-oriented electrical steel product was successfully developed through the processes of composition design, RH refining, continuous casting, hot rolling, single cold reducing, continuous annealing, finish packing and so on. And in magnetic property testing, the iron loss P1.5/50 of the high grade non-oriented electrical steel was 2.73 W/kg and the magnetic induction B50 was 1.70 T. The finished product has been applied to high efficient refrigerator compressor industry and used to make motor stators. The average iron loss P1.5/50 of the motor stator after annealing was 1.8 W/kg and after the motor stator assembeled into the whole machine, the motor efficiency was more than 86 %. It is proved that the researched high grade non-oriented electrical steel satisfies the performance requirements of high efficient refrigerator compressor motors.

Key words:

high , efficient , refrigerator , compressor, , high , grade , non-oriented , electrical , steel, , magnetic , property, , motor , efficiency

张振海, 鲍磊, 孙涛, 张文英, 赵海山, 吴耀光. 高效冰箱压缩机用高牌号无取向硅钢研制[J]. 电工钢, 2021, 3(3): 21-.

ZHANG Zhenhai, BAO Lei, SUN Tao, ZHANG Wenying, ZHAO Haishan, WU Yaoguang.

Research on high grade non-oriented electrical steel applied to high efficient refrigerator compressor [J]. Electrical Steel, 2021, 3(3): 21-.

[1]	杨鑫, 刘刚. 渗硅+退火对取向硅钢组织及磁性能的影响[J]. 电工钢, 2021, 3(2): 1-4.
[2]	吴进, 万方潜, 张庆春. 含铜取向硅钢热轧工艺优化[J]. 电工钢, 2021, 3(2): 11-15.
[3]	陆佳栋, 吴圣杰, 李慧, 岳重祥. 卷取温度对0.5 %Si无取向硅钢组织和磁性能的影响[J]. 电工钢, 2021, 3(2): 16-20.
[4]	李慈颖, 隋亚飞, 田飞, 谢凯, 吴高亮, 吴泽交. RH精炼工艺对无取向电工钢质量的影响[J]. 电工钢, 2021, 3(2): 21-31.
[5]	安灵子, 刘海涛, 王国栋. 热轧卷取温度对低硅无取向硅钢组织、织构及磁性能的影响#br#[J]. 电工钢, 2021, 3(1): 15-.
[6]	付珊, 魏庆庆, 陈冬梅, 刘海涛. 薄带连铸流程制备0.1 mm无取向硅钢极薄带的研究[J]. 电工钢, 2021, 3(1): 22-.
[7]	华国龙, 樊立峰, 肖丽俊, 岳尔斌, 陆斌, 何建中, 乔继强, 张文博. 无取向电工钢头尾磁性能波动分析[J]. 电工钢, 2021, 3(1): 28-.
[8]	安珍珍, 陈冬梅, 魏庆庆, 刘海涛. 卷取温度对0.4 %Si硅钢组织、织构及磁性能的影响[J]. 电工钢, 2020, 2(5-6): 20-.
[9]	周情耀, 秦镜, 赵海斌, 徐星星. 钇对冷轧高硅钢薄板组织、织构及磁性能的影响[J]. 电工钢, 2020, 2(3): 9-13.
[10]	陈振文, 谢凯, 尹振芝, 刘彭. 高牌号无取向硅钢50W350炼钢生产实践[J]. 电工钢, 2020, 2(3): 14-17.
[11]	刘文鹏, 高振宇, 郭琪, 辛亚会, 陈春梅, 李亚东. 常化温度对高牌号无取向硅钢析出物的影响[J]. 电工钢, 2020, 2(3): 18-24.
[12]	张峰, 王波, 沈侃毅. 高硫硅钢硫化物析出行为及其微观组织和电磁性能变化#br#[J]. 电工钢, 2020, 2(2): 1-7.
[13]	童海斌, 李刚, 张泉, 王龙, 张培毅, 罗文俊, 朱登武. 酸连轧机高牌号无取向硅钢焊接工艺优化[J]. 电工钢, 2020, 2(2): 26-30.
[14]	李毅伟, 李德君, 乔浩浩. 高冲片性50BW600电磁性能影响因素及工艺控制[J]. 电工钢, 2020, 2(2): 31-34.
[15]	张晃清, 刘国祥. 退火处理对硅钢冲片性能提升的研究[J]. 电工钢, 2020, 2(2): 35-38.