Steelmaking ›› 2014, Vol. 30 ›› Issue (6): 5-9.
Previous Articles Next Articles
Accepted:
Online:
Abstract: n the study, steelmaking sludge, quartz sand and manganese ore were mixed at a specific ratio to make slag former for semisteel steelmaking, and this method was experimental vivificated to feasible, steelmaking sludge was cyclic utilized. Industrial test show that the new slag former had a better metallurgical effect than the old one. Slag forming time was shortened by 0.5 min, the dephosphorization rate and manganese mass fraction of the molten steel was improved by 1.2 % and 0.01 % respectively, the mass fraction of T.Fe was reduced by 0.55 % in slag and phase composition of the slag completely meet the requirement of splashing, by which a better splashing effect was obtained.
Key words: steelmaking sludge, slag former, recycling;secondary resource
0 / / Recommend
Add to citation manager EndNote|Ris|BibTeX
URL: http://journal05.magtechjournal.com/Jwk3_gt/lg/EN/
http://journal05.magtechjournal.com/Jwk3_gt/lg/EN/Y2014/V30/I6/5