电工钢 ›› 2025, Vol. 7 ›› Issue (6): 18-.

• • 上一篇    下一篇

谐波工况下不同取向硅钢的服役特性研究

张俊杰1,耿  川1,杨  帅1,周俊杰1,蒋川宁1,杨昌均2,赵小军3   

  1. 〗(1.无锡普天铁心股份有限公司,江苏 无锡 214000;
    2.重庆南瑞博瑞变压器有限公司,重庆 408000;
    3.华北电力大学电力工程系,河北 保定 071003)

  • 出版日期:2025-12-28 发布日期:2025-12-29

Service properties of different grain-oriented silicon steel under harmonic excitation

ZHANG Junjie1, GENG Chuan1, YANG Shuai1, ZHOU Junjie1, JIANG Chuanning1, YANG Changjun2, ZHAO Xiaojun3   

  1. (1.Wuxi Putian Iron Core Co., Ltd., Wuxi 214000, China;
    2. Chongqing NARIBORI Transformer Co., Ltd., Chongqing 408000, China;
    3. Department of Electrical Engineering, North China Electric Power University, Baoding 071003, China)
  • Online:2025-12-28 Published:2025-12-29

摘要: 三相五柱铁心和三相卷铁心等分框铁心中存在3次谐波磁通,仿真表明磁通中3次谐波含量占比约为17 %,因此以上铁心制备时建议选用薄规格、低损耗的取向硅钢。研究了在不同谐波次数、谐波含量下超稳定低铁损取向硅钢(USL硅钢)和高磁感应取向硅钢(HiB硅钢)的服役特性。根据损耗分离计算方法获得了不同硅钢的损耗三分量占比,相比同牌号HiB硅钢,USL硅钢涡流损耗占比相近,但异常损耗占比较小。硅钢片的异常损耗与频率呈正比关系,因此,相同谐波工况下,异常损耗占比较小的USL硅钢受谐波的影响较小。

关键词: 谐波, USL硅钢, HiB硅钢, 损耗

Abstract: Simulation shows that the proportion of 3rd harmonic content in the magnetic flux of the three-phase five-limb core and the three-phase wound core is about 17 %. These cores are recommended to be prepared using thin-gauge and low-loss grain-oriented silicon steel. The service properties of ultra-stable low-loss silicon steel (USL) and high magnetic induction oriented silicon steel (HiB) were studied under different harmonic orders and harmonic contents. According to the loss separation model, the losses of different silicon steels are divided into hysteresis loss, eddy current loss, and excess loss. Compared with HiB silicon steel of the same grade, USL silicon steel has a similar proportion of eddy current loss and a smaller proportion of excess loss. Under the same harmonic excitation, USL silicon steel with a lower proportion of excess loss is less affected by harmonic, because the excess loss of silicon steel is proportional to the frequency.

Key words: harmonic, USL silicon steel, HiB silicon steel, loss