电工钢 ›› 2019, Vol. 1 ›› Issue (1): 42-48.

• • 上一篇    下一篇

退火温度对2.5 %Si硅钢组织及磁性能的影响

何志坚,施立发,裴英豪,程国庆,占云高,夏雪兰   

  1. 马鞍山钢铁股份有限公司,安徽 马鞍山 243000
  • 出版日期:2019-10-28 发布日期:2020-07-13

Effect of annealing temperature on microstructure and magnetic properties of nonoriented silicon steel containing 2.5 %Si

HE Zhijian, SHI Lifa, PEI Yinghao, CHENG Guoqing, ZHAN Yungao, XIA Xuelan   

  1. Maanshan Iron & Steel Co., Ltd., Maanshan 243000,China
  • Online:2019-10-28 Published:2020-07-13

摘要: 研究了退火温度对硅质量分数为2.5 %的硅钢组织和磁性能的影响规律。结果表明:当退火温度从850 ℃提高至1 050 ℃时,P1.5/50呈先下降后缓慢上升的趋势,且在950 ℃时达到最低,P1.0/400呈先下降后上升的趋势,在900 ℃时达到最低;随着退火温度的升高,有利织构组分强度逐渐降低,磁感B50呈单调递减趋势。

关键词: 硅钢, 退火温度, 显微组织, 磁性能

Abstract: The effect of annealing temperature on microstructure and magnetic properties of nonoriented silicon steel containing 2.5 %Si was investigated in this paper. The results showed that, the effect of annealing temperature on magnetic properties is obvious, with the increase of annealing temperature from 850 ℃ to 1 050 ℃, the iron loss P1.5/50 value is firstly decreased and then increases slightly, and reaches the lowest at 950 ℃, P1.0/400 value is firstly decreased and then increased, and reaches the lowest at 900 ℃. With the increase of annealing temperature, the strength of beneficial texture components decreases gradually, and the magnetic induction B50 decreases monotonously.

Key words: silicon steel, annealing temperature, microstructure, magnetic properties