[1] |
MA Deji, LI Jianwei, ZHANG Hang, PEI Ruilin.
Analytical calculation and prediction method of electrical steel consumption for traction motor of new energy vehicle
[J]. Electrical Steel, 2022, 4(2): 18-.
|
[2] |
SONG Xinli, PENG Yufan, LI Zhaozhen, HUANG Changhu, PAN Ziqin, LIU Jing.
Fatigue properties and fracture mechanism of high strength non oriented electrical steel
[J]. Electrical Steel, 2022, 4(1): 12-.
|
[3] |
LI Haoze, LI Min, LIU Dezhuang, LI Aodi, MA Yingche.
Effects of yttrium on microstructure, elevatedtemperature tensile properties and fracture mechanism of 6.5 % Si non-oriented electrical steel#br#
[J]. Electrical Steel, 2022, 4(1): 18-.
|
[4] |
WANG Jiabao, MA Deji, LI Dan, ZHANG Hang, PEI Ruilin.
Analysis of material selection on silicon steel for new energy vehicle motor
[J]. Electrical Steel, 2022, 4(1): 25-.
|
[5] |
ZHANG Ming, WU Zhanjun, XIAO Feng, ZHOU Yun.
Control practice on hole defect of nonoriented electrical steel
[J]. Electrical Steel, 2022, 4(1): 40-.
|
[6] |
DUAN Jian'gao, TANG Hongbo, HUANG Wangya.
Application of steel coil end inspection Robot in continuous annealing coating unit
[J]. Electrical Steel, 2022, 4(1): 49-.
|
[7] |
YAO Haidong, LIU Gongtao, HU Zhiyuan, AN Dongyang, ZHANG Baolei, CHENG Lin.
Influence of normalizing temperature on microstructure and properties of non-oriented electrical steel sheets#br#
[J]. Electrical Steel, 2021, 3(6): 19-.
|
[8] |
XIE Kai, LI Ciying, WU Gaoliang, SONG Wei, WU Zejiao, XIANG Jiming, ZHOU Herong.
Research on corrosion behavior of non-oriented electrical steel 50W800 in simulated marine environment
[J]. Electrical Steel, 2021, 3(4): 32-.
|
[9] |
ZHANG Zhenhai, BAO Lei, SUN Tao, ZHANG Wenying, ZHAO Haishan, WU Yaoguang.
Research on high grade non-oriented electrical steel applied to high efficient refrigerator compressor
[J]. Electrical Steel, 2021, 3(3): 21-.
|
[10] |
XU Yanbo, YI Zhengxin.
New technology of annealing coating for electrical steel used in new energy vehicles
[J]. Electrical Steel, 2021, 3(3): 43-.
|
[11] |
HUANG Jian.
Interpretation of GB 18613-2020 "Minimum allowable values of energyefficiency and values of efficiency grades for motors"#br#
[J]. Electrical Steel, 2021, 3(1): 33-.
|
[12] |
ZHAO Zhiyang, SONG Renbo, WANG Yuqi, ZHANG Yingchao, YU Ping .
Effect of wire cutting electric current density on cutting surface of non-oriented electrical steel
[J]. Electrical Steel, 2020, 2(4): 27-.
|
[13] |
QIAO Haohao, LI Dejun, LI Yiwei.
Study on production technology of non oriented silicon steel 50BW600 for high voltage motor#br#
[J]. Electrical Steel, 2020, 2(1): 41-44.
|
[14] |
LIU Qingsong, ZHANG Zhenhai, WANG Litao, PEI Yinghao, QI Xuan.
Study on high temperature ductility of Fe-3.0 %Si nonoriented electrical steel
[J]. Electrical Steel, 2019, 1(2): 42-44.
|