炼钢 ›› 2019, Vol. 35 ›› Issue (6): 1-5.
• 铁水预处理 • 下一篇
孙贞贞1,2，但斌斌1,2，牛清勇1,2，欧阳德刚3，容芷君1,2
接受日期:
出版日期:
Accepted:
Online:
摘要： 为改进KR脱硫设备和工艺，以期改善KR脱硫过程中出现的柱状回转区和“死区”现象，参考国内某钢厂KR脱硫搅拌工艺过程，应用Fluent软件，采用VOF模型对槽内的搅拌流场进行数值分析，研究不同叶片形状和偏心搅拌下的流场特性。结果表明：与常规三叶搅拌相比，螺旋三叶搅拌流场中，“死区”并未得到改善，且柱状回转区面积增大、流速和湍动能均减小；偏心搅拌基本消除了柱状回转区和 “死区”现象，且偏心距离为30 mm时改善效果最好。
关键词: Fluent软件, KR脱硫, 数值模拟, 偏心搅拌
Abstract: Referring to the KR desulfurization and agitation process of a steel mill in China,using Fluent software,the VOF model was used to numerically analyze the agitated flow field in the tank,and the flow field characteristics under different blade shapes and eccentric stirring were studied to provide reference for the improvement of KR desulfurization equipment and process in order to improve the columnar revolving zone and “dead zone” phenomenon in the KR desulfurization process.The results show that compared with the conventional threeblade stirring,the “dead zone” is not improved in the spiral threeblade mixing flow field,and the area of the columnar rotating zone is increased,the flow velocity and the turbulent energy are reduced.Eccentric stirring basically eliminates the columnar revolving zone and the “dead zone” phenomenon,and the improvement effect is best when the eccentric distance is 30 mm.
Key words: Fluent software, KR desulfurization, numerical simulation, eccentric stirring
孙贞贞1,2，但斌斌1,2，牛清勇1,2，欧阳德刚3，容芷君1,2. KR法铁水脱硫搅拌流场的数值分析[J]. 炼钢, 2019, 35(6): 1-5.
0 / / 推荐
导出引用管理器 EndNote|Ris|BibTeX
链接本文: http://journal05.magtechjournal.com/Jwk3_gt/lg/CN/
http://journal05.magtechjournal.com/Jwk3_gt/lg/CN/Y2019/V35/I6/1
