转炉高温烟气喷吹煤粉回收煤气工业试验研究

炼钢 ›› 2017, Vol. 33 ›› Issue (6): 67-72.

转炉高温烟气喷吹煤粉回收煤气工业试验研究

周建安1,2，蒋学凯1,2，谢剑波1,2，张华1,2，倪红卫1,2，王宝1,2，李雷3，王社教3，李海峰

1. 武汉科技大学省部共建耐火材料与冶金国家重点实验室，湖北武汉430081； 2. 武汉科技大学钢铁冶金及资源利用省部共建教育部重点实验室，湖北武汉430081； 3. 中国宝武武钢集团鄂城钢铁有限责任公司，湖北鄂州436000

接受日期:1900-01-01 出版日期:2017-12-05

Industrial testing of high quality converter gas recovery by injecting pulverized coal into the high temperature gas of converter

Accepted:1900-01-01 Online:2017-12-05

摘要/Abstract

摘要： 针对目前转炉煤气低热值和回收率低的问题，提出以中国宝武武钢集团鄂城钢铁有限责任公司35 t转炉煤气回收系统为研究对象来探究制备高品质转炉煤气的新工艺。通过对比不同煤粉喷吹进入转炉汽化冷却烟道内的反应效果，来研究喷吹量对转炉煤气回收质与量的影响。结果表明：在煤气回收期，喷吹煤粉时，煤气中O2和CO2含量降低，CO、H2含量和煤气回收总量增加，煤气热值提高。当煤粉喷吹速率为30 kg/min时，转炉煤气中O2和CO2体积分数分别降低63.92 %和41.19 %，CO和H2体积分数分别提高20.09 %、240.18 %，煤气回收时间增加11.40 %。因此，新工艺具有提高转炉煤气回收质和量的优点。

关键词: 转炉煤气回收, 汽化烟道, 喷吹, 煤粉

Abstract: Based on low calorific value and recovery amount of converter gas from the present various steel mills, a new process on the basis of the industrial trial in a converter with 35 t steel capacity from Echeng Iron and Steel Co.,Ltd. was proposed for preparation of highquality converter gas. By comparing the injecting rate and various carbon materials injected into the converter vaporization cooling flue, the effects of which on the quality and amount of converter gas are therefore investigated. The results show that, with increasing the injection amount of carbon materials, the volume fractions of O2 and CO2 in the gas are decreased, yet CO and H2 in the gas are increased correspondingly. When the rate of pulverized coal injection is 30 kg/min, the volume fractions of O2 and CO2 in the gas are decreased by 63.92 %, 41.19 %, but CO and H2 in the gas are increased by 20.09 %, 240.18 % and the recovery time of gas is increased by 11.40 %, respectively. Therefore, this process is beneficial to improving the quality and amount of converter gas.

Key words: converter gas recovery, vaporization cooling flue, injection, pulverized coal

周建安1,2，蒋学凯1,2，谢剑波1,2，张华1,2，倪红卫1,2，王宝1,2，李雷3，王社教3，李海峰. 转炉高温烟气喷吹煤粉回收煤气工业试验研究 [J]. 炼钢, 2017, 33(6): 67-72.

[1]	朱荣1，2，魏光升1，2，唐天平1，2. 电弧炉炼钢流程洁净化冶炼技术[J]. 炼钢, 2018, 34(1): 10-19.
[2]	万雪峰，曹东，刘祥，朱晓雷. CO2在转炉中的应用技术研究[J]. 炼钢, 2015, 31(4): 38-41.
[3]	史彩霞，李中金. 钒钛铁水脱硫工艺分析及实践[J]. 炼钢, 2014, 30(5): 5-.
[4]	陈洋，陈景锋，班树勋，欧西达. 钝化石灰在复合喷吹铁水脱硫工艺中的应用[J]. 炼钢, 2014, 30(5): 66-.
[5]	李明晖;欧阳德刚;刘凯;孙树林;朱善合;罗巍. 脱硫液态渣改性除硫新工艺的研究与应用[J]. , 2014, 30(1): 41-45.
[6]	徐立山;孔超;周波. 含钒铁水复合喷吹脱硫工艺优化[J]. , 2013, 29(6): 1-4.
[7]	孙树林;刘凯;王春锋;吴维轩;刘先同. 武钢CSP新型复合喷吹铁水脱硫工艺[J]. , 2013, 29(4): 11-14.
[8]	付中华;杨宁川;吴燕萍;胡燕;吴令. 复合喷吹脱硫效果影响因素分析[J]. , 2013, 29(4): 30-32.
[9]	吴维轩;张超;刘凯;吴浩. 铁水复合喷吹脱硫生产低硫钢的实践[J]. , 2012, 28(3): 11-15.
[10]	毕秀荣;朱荣;刘润藻;吕明;易操. CO₂-O₂混合喷吹工艺冶炼不锈钢的基础研究[J]. , 2012, 28(2): 67-70.
[11]	孙伟;曹同友;刘凯;袁凡成;吴浩;杨治争. 钝化镁-石灰复合喷吹脱硫工艺优化试验[J]. , 2010, 26(6): 35-37,4.
[12]	杨辉合;戈文荪;陈雯;梁新腾;林鹏. 低镁高效复合脱硫剂的应用实践[J]. , 2010, 26(5): 1-4.
[13]	尹卫平. 铁水喷吹脱硅及铁粉还原技术的开发及应用[J]. , 2010, 26(4): 5-7,23.
[14]	吴明. 单直孔喷枪与双侧孔喷枪的脱硫效果分析[J]. , 2010, 26(4): 1-4,11.
[15]	张茂林;徐安军. KR法与喷吹法在铁水脱硫中应用的比较[J]. , 2009, 25(05): 73-77.